This Website is using cookies to improve your user experience and our service. By using this website you agree the use of cookies.

OPC - Interface: OPC DA 2.0 | Driver: NETxAutomation

  • Simultaneous use of different technologies (KNX, BACnet, Modbus, SNMP, MICROS Fidelio/Opera, Protel, VingCard, etc.)
  • Direct access to the data via OPC Server
  • For visualization projects with a NETx Server (NETx BMS Server or NETx KNX OPC Server) or any other OPC Server
  • Main/backup solution possible
  • In combination with the NETx BMS Server: access to historical data, Metering Chart, server based calendar and trending module

HOME

Product-ID: S07.05.0.01.02

400 elements
20 pages
400 elements per page
50 eventor element
50 calendar elements
50 alarm elements
10 scene elements
0 virtual devices

BASIC

Product-ID: S07.05.0.01.03

2.500 elements
100 pages
500 elements per page
500 eventor element
500 calendar elements
500 alarm elements
500 scene elements
500 virtual devices

PROFESSIONAL

Product-ID: S07.05.0.01.04

10.000 elements
200 pages
1000 elements per page
∞ eventor element
∞ calendar elements
∞ alarm elements
∞ scene elements
∞ virtual devices

ENTERPRISE

Product-ID: S07.05.0.01.05

∞ elements
∞ pages
1000 elements per page
∞ eventor element
∞ calendar elements
∞ alarm elements
∞ scene elements
∞ virtual devices

Direct(KNX) - Interface: Direct(KNX) | Falcon Driver - KNX Association

Not suitable for large projects and projects with more systems.

  • Only for KNX projects
  • Allows the direct connection to KNX without OPC server
  • Only for one KNX interface e.g. KNXnet/IP routing, KNXnet/IP tunnelling or USB

HOME

Product-ID: S07.05.0.02.02

400 elements / 20 pages

BASIC

Product-ID: S07.05.0.02.03

2.500 elements / 100 pages 

System requirements

PC: Intel or AMD - 1.8 GHz (multi-core recommended), 4GB RAM, Hard disk: 32 GB (64 GB recommended), Ethernet interface: 100 MBit/s
Operation system: For maintainable systems we strongly recommend at least Windows 10 or Windows Server 2016 (or higher), except NETx KNX OPC Server 3.5. Our products basically also run on older Windows versions down to Windows 7 and Windows Server 2008. However, due to limited future support for these operating systems by Microsoft we will not be able to provide full support for our software running on these systems.